主营:
数量(mm) | 价格(元/mm) |
---|
特点:Features 上海帕特泵业制造有限公司PTL系列(并派生出PTRL型管道热水泵、PTHL立式化工泵、PTYG型油泵)单级单吸立式管道离心泵是我公司利用优秀的水利模型,并根据各类用户在不同使用条件下精心设计而成,符合JB/53058-93质量标准。 PTL series (derivate PTRL in-line heat exchanger pump, PTHL vertical chemical pump and PTYG oil pump) single-stage single-suction pipeline centrifugal pump is carefully designed by our company utilizing excellent water conservancy models based on different working conditions of various users, which conforms to jb/t53058-93 quality standard. PTL(PTRL)系列单级单吸立式管道离心泵由于电机与泵直联,简化了中间传动的结构,增强了运转的平稳性,轴封采用硬质合金机械密封,无泄漏。泵采用管道式结构,泵的进出口能像阀门一样安装在管路的任何位置及任何方向,与普通卧式泵比占地面积减少了30%,且具有运转噪音低,振动小等特点。易损件的使用寿命大大延长。本型泵以其性能稳定、高效节能、占地面积小、结构紧凑等特点,广受市场青睐。 The motor and pump are joined directly without transmission parts. So they operate smoothly. The shaft seal is made with hard alloy mechanical seal, therefore, there is no leakage. The inlet and outlet can be fixed anywhere like valves in pipeline. Compared with common horizontal pump, PTL series can decrease 30 percent floor space. Beside, they feature smooth operation and lower noise etc. The life of damageable parts is prolonged. In conclusion, this series pumps are favored in market because of their smooth operation, high efficiency, less energy consumption, small floor space and compact structure. 用途:Application 适用于工业、城市给水、高层建筑供水 Water supply in industry, cities and high-rises 消防管道增压 Fire fighting pipeline pressurizing 冷暖空调冷热水循环 Cold and hot water circulation in air-condition 远距离输水 Transport water from far away 生产工艺循环增压输送、并适用于各种给排水设备、锅炉等设备的配套使用 Pressurizing transport in industrial circulating system, and all kinds of water supply equipments, boiler etc. 工作条件:Operating Conditions 吸排介质的固体不溶物体积不超过体积的1%,粒度≦0.2mm The volume of non-soluble in operating medium can not exceed 1 percent than which of total medium. Besides, granularity should not greater than 0.2mm; 流量范围 Capacity range:2~1800m3/h; 扬程范围 Head range: 5~150m; 泵系统最高工作压力≦1.6MPa,即吸入口压力+泵扬程≦1.6MPa System Max: working pressure should not be greater than 1.6MPa, namely pressure in suction add to head of head should not be greater than 1.6MPa. 介质温度 Liquid temperature:-15℃﹤T﹤+105℃ 周围环境温度 Ambient temperature: ≦40℃ 电机防护等级 Motor's degree of protection:IP54或IP44; 电机绝缘等级 Motor's class of insulation: B级或F级
免责声明:以上信息由会员自行提供,内容的真实性、准确性和合法性由发布会员负责。五金机械网对此不承担任何责任。
友情提醒:为规避购买风险,建议您在购买相关产品时,优先选择金牌会员。